Putting out a fire pit the right way is vital to safely enjoy backyard bonfires and prevent damage. Solo Stove offers various smokeless fire pits like the popular solo stove Bonfire fire pit and larger Solo Stove Yukon models. These stainless steel fire pits make an efficient fire and enable you to get a fire going efficiently without excessive smoke.
However, you need to learn how to properly put out a Solo Stove once you’re done roasting marshmallows or enjoying the campfire. Traditional fire pits are often left burning overnight, damaging your fire pit. Solo Stove recommends never leaving a fire pit unattended or burning all night. Instead, allow the good fire you created to burn down to embers first.
Then, use the solo stove lid to cut off the fire’s oxygen and suffocate the remaining flames. The lid helps cool the fire down completely. You can also use a coal shovel to sprinkle sand over the fire, smothering stubborn embers. Avoid pouring water on a fire pit as the immediate steam can damage the stove. You can safely put out your Solo Stove fire with the right accessories, like heat-resistant gloves. By properly extinguishing the fire, you’ll prevent damage to the stove and enjoy your smokeless backyard fire experience for years.
In our guide, you won’t find this a solo stove bonfire 2.0 review, yet you will learn how to extinguish a fire in your solo stove bonfire the right way. By the end, you’ll see how important it is not to leave a fire pit burning overnight after you have finished sitting around the fire. (Read Can Chickens Eat Rabbit Food)
What’s The Best Way to Put Out Your Solo Stove Bonfire 2.0
The Solo Stove is a popular smokeless fire pit that allows you to enjoy a campfire or backyard fire without dealing with excessive smoke. Solo Stove fire pits like the Bonfire 2.0 fire pit and Yukon use patented technology to burn wood efficiently and reduce smoke.
Unfortunately, a solo stove doesn’t give you full instructions. The company offers lots of information about how to get the fire going, which makes lighting a fire in a Solo Stove very easy. You still need to learn how to put out your Solo Stove fire pit.
Let the Fire Burn Down
The best way to put out your Solo Stove bonfire is to let the fire burn down. Solo Stove fire pits are designed to burn wood and embers efficiently. So, as long as you have good logs in your fire pit, the fire should burn down to just embers.
Allowing the fire to burn down on its own takes some time, but it’s the safest method. Never leave a fire unattended, but you can let the fire burn down to embers before putting it out. Watch the fire as it gets lower and lower until just embers remain.
Use the Lid to Suffocate the Fire
All Solo Stove fire pits come with a lid, which you can use to suffocate the fire once it has burned down. Place the lid on top of the fire pit to remove oxygen from the embers. This can be the best way to extinguish remaining flames without using extra items.
The Solo Stove bonfire lid is made of stainless steel, so it conducts heat well. The lid may take 10-15 minutes to cool down enough to remove. A check under the lid can help to see if the fire and embers have been extinguished before removing it.
Sprinkle Sand Over the Fire
Another easy way to put out a fire in your Solo Stove bonfire 2.0 is by using sand to put on the flames and embers. According to Solo Stove, a layer of sand in the bottom of the fire pit can even help with airflow, yet it can make the stove difficult to clean before the next use. (Read Can I Use 10/3 Wire For A Stove)
Use a Fire Extinguisher
A last resort for putting out a stubborn fire in your Solo Stove is to use a fire extinguisher. The carbon dioxide or dry chemical extinguishers are safe for metal fire pits. Carefully aim the extinguisher at the base of the flames and sweep across the fire slowly.
A standard fire extinguisher should be enough to put out a fire in a portable fire pit like the Bonfire 2.0 or Solo Stove Ranger. Just be prepared for some cleanup afterward. Avoid spraying water around a fire as the embers generate dangerous steam. Let a larger fire pit cool before cleaning.
Top Tips When You Buy The Solo Stove Bonfire
Avoid Pouring Water on a Solo Stove Bonfire
While pouring water on the fire may seem like a quick solution, avoid pouring water onto flames or hot embers in your Solo Stove. Pouring water into a hot fire pit can damage the metal and cause the metal walls to warp or crack over time with repeated use.
Additionally, pouring water onto embers can cause dangerous steam burns. Wait for the solo stove bonfire to cool down before cleaning out the ash.
Use Heat-Resistant Gloves
Solo Stove recommends using heat-resistant gloves when handling a hot fire pit. The entire stove will be hot after a fire. The lid, in particular, takes time to cool down after suppressing the flames.
Properly rated fire gloves will allow you to safely handle and move the stove as needed to put out the fire. Never attempt to move or touch a hot solo stove, bonfire, or lid with bare hands.
Allow the Fire Pit to Fully Cool Before Moving
Let your Solo Stove’s cool before attempting to move or store it. All of the solo stove fire pit models retain heat very well. The metal walls and air holes remain dangerously hot for some time after the fire has gone out.
Attempting to move or pack up a hot Solo Stove can cause severe burns and even fire damage to nearby combustibles. Avoid placing or storing the solo stove bonfire 2.0 near anything flammable. Allow 1-2 hours until the stove has cooled to move it away from where the solo stove stands before handling and putting your fire pit away. (Learn How To Connect A Wood Furnace To Existing Ductwork)
Never Leave the Fire Unattended While Burning
Foremost, never ever leave a burning fire in your Solo Stove unattended. Solo Stove fire pits are safe when used properly, but fire pits always carry a risk of spreading fire if left alone. Stay beside your Solo Stove and supervise when the fire is lit.
Even a properly contained backyard fire can pose risks. Embers may pop out of the fire pit and ignite dry leaves or grass nearby. Wind can blow sparks out of the pit as well. Keep a fire extinguisher and water hose nearby in case of escaped embers, and keep your fire under control.
Buy a Solo Stove Accessory Bundle
Solo Stove products can quickly enhance your fire pit experience. The range of solo stove accessories offer tools for lighting, managing, and putting out Solo Stove fires.
The Fire Pits are made to offer the best experience for when sitting around the fire pit, so you can enhance this with tools such as stainless steel poker, nylon fire starter, and ash rake – all useful items for when your fire gets going, and you need to make sure the fire pit stays under control.
The Bonfire Safety Bundle packs a lid lifter, solo stove shield, fire extinguisher, gloves, and more to help you safely put out your fire pit.
Don’t Use Water to Put Out a Solo Stove Fire Pit
It can be tempting to toss a bucket of water onto an active fire to quickly put it out. However, this dangerous technique can damage your Solo Stove and cause injury. The immediate stream and boil of steam created when water hits hot metal and burning wood can spray back dangerously.
Solo Stove advises never to pour water into the fire pit while wood is burning. Always allow the solo stove bonfire to die completely and cool off before attempting to clean out ash with water. A fire extinguisher is much safer for suppressing flames in an emergency.
Conclusion: How To Put Out Solo Stove?
Properly putting out a Solo Stove fire pit is key to safely enjoying your smoke-free fire experience. Allow the flames to burn down completely before attempting to extinguish the fire. Use accessories like the lid, gloves, or a fire extinguisher to smother the fire once only embers remain.
Avoid pouring water directly on hot coals to prevent steam damage. Instead, sprinkle sand to safely suffocate the fire. Let the stainless steel fire pit cool for 1-2 hours before moving or storing. With the right precautions, your Solo Stove can contain backyard bonfires safely for years of use.
Follow these tips to prevent damage to your fire pit while getting a satisfying campfire experience without excessive smoke. Use the right tools to properly put out the fire, and your Solo Stove will continue providing good fires every time.
FAQs About Putting Out a Solo Stove
How long does it take for a Solo Stove to fully cool down?
Allow at least 1-2 hours for a Solo Stove fire pit to fully cool down completely after use before attempting to move or store it. The stainless steel walls retain heat very efficiently. Let the stove completely cool to avoid potential burns or fire damage. (Learn How Hot Does A Chimney Flue Get)
Should I clean out the fire pit after each use?
It’s recommended to fully clean out the ash from your Solo Stove fire pit after each use. Ash left in the bottom of the pit can clog airflow and impact performance. Wait for complete cooling, then carefully empty the ash.
What’s the best way to clean out ash?
An ash rake tool makes cleanup easier. Allow the solo stove bonfire to fully cool, then stir and scrape out the ash. You can also carefully rinse ash out with water. Just avoid soaking the embers while still hot to prevent steam damage.
Can I bury the fire pit or coals in soil?
Burying coals in the soil is not recommended. The embers can continue smoldering for hours and potentially ignite surrounding material. Let the fire fully extinguish and cool before attempting to clean out.
Is it safe to store the fire pit with ash still inside?
It’s best to fully clean out all ash before storing your Solo Stove. Ash left behind can fall out, make a mess, or cause odor. Properly cleaning the stove will also help maximize airflow and performance.
